Uncertainty and sensitivity analyses as a validation tool for BWR bundle thermal-hydraulic predictions

In recent years, more realistic safety analyses of nuclear reactors have been based on best estimate (BE) computer codes. The need to validate and refine BE codes that are used in the predictions of relevant reactor safety parameters, led to the organization of international benchmarks based on high quality experimental data. The OECD/NRC BWR full-size fine-mesh bundle test (BFBT) benchmark offers a good opportunity to assess the accuracy of thermal-hydraulic codes in predicting, among other parameters, single and two phase bundle pressure drop, cross-sectional averaged void fraction distributions and critical powers under a wide range of system conditions. The BFBT is based on a multi-rod assembly integral test facility which is able to simulate the high pressure, high temperature fluid conditions found in BWRs through electrically heated rod bundles. Since code accuracy is unavoidably affected by models and experimental uncertainties, an uncertainty analysis is fundamental in order to have a complete validation study. In this paper, statistical uncertainty and sensitivity analyses are used to validate the thermal-hydraulic features of the POLCA-T code, based on a one dimensional model of the following macroscopic BFBT exercises: (1) single and two phase bundle pressure drop, (2) steady-state cross-sectional averaged void fraction, (3) transient cross-sectional averaged void fraction and (4) steady-state critical power tests. The Latin hypercube sampling (LHS) strategy was chosen since it densely stratifies across the range of each uncertain input probability distribution, allowing a much better coverage of the input uncertainties than simple random sampling (SRS). The results show that POLCA-T predictions on pressure drop and void fractions under a wide range of conditions are within the validation limits imposed by the uncertainty analysis, while the accuracy of critical power predictions depends much on the boundary and input conditions.     

Antiproliferative,proapoptotic and morphogenic effects of the flavonoid rutin on human glioblastoma cells

In this study, we investigated the effects of the flavonoid rutin (3,3′,4′,5,7-pentahydroxyflavone-3-rutinoside) on glioma cells, using the highly proliferative human cell line GL-15 as a model. We observed that rutin (50–100 μM) reduced proliferation and viability of GL-15 cells, leading to decreased levels of ERK1/2 phosphorylation (P-ERK1/2) and accumulation of cells in the G2 phase of the cell cycle. On the other hand, 87.4% of GL-15 cells exposed to 100 μM rutin entered apoptosis, as revealed by flow cytometry after AnnexinV/PI staining. Nuclear condensation and DNA fragmentation were also observed, further confirming that apoptosis had occurred. Moreover, the remaining cells that were treated with 50 μM rutin presented a morphological pattern of astroglial differentiation in culture, characterised by a condensed cell body and thin processes with overexpression of GFAP. Because of its capacity to induce differentiation and apoptosis in cultured human glioblastoma cells, rutin could be considered as a potential candidate for malignant gliomas treatment.     

ISO 9001 certification in the American Continent: a statistical analysis and modelling

The ISO 9001 standard is considered as an effective tool to support a quality management system (QMS). A steady growth in the number of ISO 9001 issued certificates is observed worldwide, confirming the interest of companies in this approach. However, information regarding this behaviour over time in the American Continent is scarce. This paper presents a set of qualitative and quantitative analyses related to the ISO 9001 certification (globally and at the country level of the Americas), the use of this standard in countries that were part of the ISO Survey 2011 and modelling the ISO 9001 certification for American countries, in order to characterise through mathematical models, the evolution of the certification process and to identify factors that influence the ISO 9001 issued certificates in the various countries analysed. Based on the work developed, a positive relationship was found between the number of issued certificates in each country per 1000 inhabitants and the indicators of economic development (Gross National Income Per Capita). It is determined that the total reserves of a country is an economic variable that directly affects the number of issued certificates, a finding not observed in other forecasting models.     

A hybrid model for a multiproduct pipeline planning and scheduling problem

Brazilian petrobras is one of the world largest oil companies. Recurrently, it faces a very difficult planning and scheduling problem: how to operate a large pipeline network in order to adequately transport oil derivatives and biofuels from refineries to local markets. In spite of being more economical and environmentally safer, the use of a complex pipeline network poses serious operational difficulties related to resource allocation and temporal constraints. The current approaches known from the literature only consider a few types of constraints and restricted topologies, hence they are far from being applicable to real instances from petrobras. We propose a hybrid framework based on a two-phase problem decomposition strategy. A novel Constraint Programming (CP) model plays a key role in modelling operational constraints that are usually overlooked in literature, but that are essential in order to guarantee viable solutions. The full strategy was implemented and produced very adequate results when tested over large real instances.     

Molecular differentiation of the species of two squid families (Loliginidae and Ommastrephidae) based on a PCR study of the 5S rDNA gene

The present study aimed to demonstrate the effectiveness of the 5s rDNA gene for the identification of commercially-valuable species of cephalopod belonging to the families Loliginidae and Ommastrephidae. Our results demonstrate distinct banding patterns in each of the six species sampled (Loligo surinamensis; Loligo sanpaulensis; Lolliguncula brevis; Sepiotheuthis sepioidea; Ornithoteuthis antillarum; Illex argentinus), as well as diagnostic traits at the genus and probably family levels. The results emphasize the efficiency of the 5s rDNA marker as a low-cost and rapid forensic technique, which not only permits the identification of species, but also differentiation of members of the Loliginidae and Ommastrephidae.     

Diffusion of coloured silica nanoparticles into human hair

A novel method for dyeing human hair fibres using coloured silica nanoparticles of 206 nm has been developed. Diffusion of coloured silica nanoparticles into hair fibres has been investigated; silica nanoparticles do not penetrate at all, or do so only sparingly, into the structure of Caucasian virgin hair. However, coloured silica nanoparticles diffused readily into bleached hair fibres. Scanning electron microscopy showed that coloured silica nanoparticles were present mainly in the outer regions of the hair structure (the inner layers of the cuticle and the outer region of the cortex). It was found that the silica nanoparticles were physically entrapped in the hair fibres and results showed a good shampoo fastness to washing.     

Can Brazil replace 5% of the 2025 gasoline world demand with ethanol?

Increasing use of petroleum, coupled with concern for global warming, demands the development and institution of CO₂ reducing, non-fossil fuel-based alternative energy-generating strategies. Ethanol is a potential alternative, particularly when produced in a sustainable way as is envisioned for sugarcane in Brazil. We consider the expansion of sugarcane-derived ethanol to displace 5% of projected gasoline use worldwide in 2025. With existing technology, 21 million hectares of land will be required to produce the necessary ethanol. This is less than 7% of current Brazilian agricultural land and equivalent to current soybean land use. New production lands come from pasture made available through improving pasture management in the cattle industry. With the continued introduction of new cane varieties (annual yield increases of about 1.6%) and new ethanol production technologies, namely the hydrolysis of bagasse to sugars for ethanol production and sugarcane trash collection providing renewable process energy production, this could reduce these modest land requirements by 29–38%.     

Fiber introduction mass spectrometry: fully direct coupling of solid-phase microextraction with mass spectrometry

This work describes the first fully direct coupling of solid-phase microextraction (SPME) with mass spectrometry. An inlet system using a septum as the only interface between the ambient and the high-vacuum mass spectrometer was constructed to allow the introduction of the SPME needle directly into the ionization region of a mass spectrometer. The PDMS-coated fiber was then placed and exposed exactly between the two ionization filaments. Uniform heating of the fiber, efficient thermal desorption, and electron ionization of the analytes were achieved. Using this new analytical technique, here termed fiber introduction mass spectrometry (FIMS), we have been able to detect and quantitate several volatile (VOC) and semivolatile (SVOC) organic chemicals (carbon tetrachloride, benzene, toluene, xylenes, gamma-terpinene, diisoamyl ether, chlorobenzene, and many PAHs) and two herbicides (Sylvex and its methyl ether) from aqueous solutions at low-ppb to ppt levels using either SPME headspace or solution extraction. FIMS shows high sensitivity (ng/L), good reproducibility, and accuracy, providing therefore a simple and effective approach to rapid analysis of VOC and SVOC in various matrixes.     

Determination of the refractive index and thickness of holographic silver halide materials by use of polarized reflectances

A method to determine the refractive index and thickness of silver halide emulsions used in holography is presented. The emulsions are in the form of a layer of film deposited on a thick glass plate. The experimental reflectances of p-polarized light are measured as a function of the incident angles, and the values of refractive index, thickness, and extinction coefficient of the emulsion are obtained by using the theoretical equation for reflectance. As examples, five commercial holographic silver halide emulsions are analyzed. The procedure to obtain the measurements and the numerical analysis of the experimental data are simple, and agreement of the calculated reflectances, by use of the thickness and refractive index obtained, with the measured reflectances is satisfactory.     

Treatment of saline wastewater contaminated with hydrocarbons by the photo-Fenton process

The application of the photo-Fenton process to the treatment of saline wastewater contaminated with hydrocarbons is investigated. Aqueous saline solutions containing raw gasoline were used as a model oil-field-produced water. The dependence on concentrations of the following reagents has been appropriately evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM), and sodium chloride (200-2000 ppm). The reactions were monitored by measurement of the absorption spectra and total organic carbon (TOC). Experimental results demonstrate that the photo-Fenton process is feasible for the treatment of wastewaters containing hydrocarbons, even in the presence of high concentrations of salt. The effect of the salt in this process is described through a series of reactions. A simple feedforward neural network model was found to correlate well the observed data for the degradation process.